The Goodman® GSC14 14 SEER Air Conditioner features a high-efficiency Copeland® scroll compressor for improved temperature and humidity control and the unique Goodman® sound control top design for quiet operation. In addition, the unit has an attractive louvered metal guard that protects the coil from damage plus a powder-paint finish that provides premium durability and improved UV protection.

Standard Features

• High-efficiency Copeland® scroll compressor with internal pressure relief valve
• Factory-installed liquid line filter dryer
• 850 RPM condenser fan motor
• High-efficiency copper tube/aluminum fin coil
• R-22 refrigerant charged for 15’ of refrigerant line
• Brass liquid and suction line service valves
• Contactor with lug connection
• Ground lug connection
• ARI Certified
• ETL Certified

Cabinet Features

• Unique Goodman® sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

The Goodman® CLQ Air Conditioner features an attractive louvered metal guard that protects the coil from damage and strengthens the unit. Designed for ground-level or rooftop mount, the raised base pan elevates the unit above the slab for excellent water drainage. The polyester powder-paint finish provides premium durability and improved UV protection.

• High-efficiency scroll compressor
• High-efficiency copper tube/aluminum fin coil
• Quiet condenser fan system includes an 8-pole, 850-RPM motor, 4-bladed fan and wire discharge grille
• High-quality sound blanket diminishes compressor operating sound
• R-22 refrigerant-charged for 15’ of refrigerant lines
• High-capacity, steel-cased liquid line filter drier
• Brass liquid and suction service valves mounted at a 45° angle with sweat connections and service ports
• Heavy-gauge G-90 galvanized-steel cabinet with appliance-quality polyester powder-paint finish with 500-hour salt-spray approval
• Attractive Architectural Gray paint finish

The Goodman® GSC13 13 SEER Air Conditioner features the unique Goodman® sound control top design for quiet operation. In addition, the unit has an attractive louvered metal guard that protects the coil from damage plus a powder-paint finish that provides premium durability and improved UV protection.

Standard Features

• Energy-efficiency compressor
• Copper tube/aluminum fin coil
• 850 RPM condenser fan motor
• R-22 refrigerant-charged for 15’ of refrigerant lines
• Factory-installed liquid line filter dryer
• Brass liquid and suction service valves with sweat connections
• Contactor with lug connections
• Ground lug connection
• ETL Certified

Cabinet Features

• Unique Goodman® sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• When properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

The Goodman® CLT Air Conditioner features an attractive louvered metal guard that protects the coil from damage and strengthens the unit. Designed for ground-level or rooftop mount, the raised base pan elevates the unit above the slab for excellent water drainage. The polyester powder-paint finish provides premium durability and improved UV protection.

• High-efficiency scroll compressor
• High-efficiency copper tube/aluminum fin coil
• Quiet condenser fan system includes an 8-pole, 850-RPM motor, 4-bladed fan and wire discharge grille
• High-quality sound blanket diminishes compressor operating sound
• R-22 refrigerant-charged for 15’ of refrigerant lines
• High-capacity, steel-cased liquid line filter drier
• Brass liquid and suction service valves mounted at a 45° angle with sweat connections and service ports
• Heavy-gauge G-90 galvanized-steel cabinet with appliance-quality polyester powder-paint finish with 500-hour salt-spray approval
• Attractive Architectural Gray paint finish

The Goodman® GMV95 Two-Stage, Variable-Speed Gas Furnace features a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. This furnace is run-tested for heating or combination heating/cooling applications. The 95% AFUE GMV95 qualifies for the new 2006 $200 energy tax credit.

Standard Features

• Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil
• Lifetime Limited Warranty on Heat Exchanger plus 10-year Furnace Replacement Limited Warranty
• Designed for multi-position installation (upflow, horizontal right or left)
• Energy-saving Hot Surface Ignition system with Norton® Mini-Igniter and patented adaptive learning algorithm
• Auto-Comfort mode to maintain a comfortable climate
• 2-stage gas valve
• Super-efficient, quiet variable-speed blower motor
• Quiet, 2-speed, induced-draft blower assembly
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Convenient left or right connection for gas/electric service
• All models comply with California NOx Standards

Cabinet Features

• Heavy-gauge, reinforced, fully insulated steel cabinet with durable, Architectural Gray baked-enamel finish
• Foil-faced insulation lines the heat exchanger compartment
• Top venting standard; alternate flue/vent located on right
• Bottom or side air inlet; removable, solid bottom

The Goodman® GCV9 Two-Stage, Variable-Speed Gas Furnace features a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. This furnace is run-tested for heating or combination heating/cooling applications. The 93% AFUE GCV9 qualifies for the new 2006 $50 energy tax credit.

Standard Features

• Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil
• Lifetime Limited Warranty on Heat Exchanger plus 10-year Furnace Replacement Limited Warranty
• Designed for multi-position installation (downflow, horizontal right or left)
• Energy-saving Hot Surface Ignition system with Norton® Mini-Igniter and patented adaptive learning algorithm
• Auto-Comfort mode to maintain a comfortable climate
• 2-stage gas valve
• Super-efficient, quiet variable-speed blower motor
• Quiet, 2-speed, induced-draft blower assembly
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Convenient left or right connection for gas/electric service
• All models comply with California NOx Standards

Cabinet Features

• Heavy-gauge, reinforced, fully insulated steel cabinet with durable, Architectural Gray baked-enamel finish
• Foil-faced insulation lines the heat exchanger compartment

The Goodman® GMS95 Single-Stage, Multi-Speed furnaces feature a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. The 95% AFUE GMS95 qualifies for the new 2006 $150 energy tax credit.

Standard Features

• Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil
• Lifetime Limited Warranty on Heat Exchanger plus 10-year Furnace Replacement Limited Warranty
• Designed for multi-position installation — upflow, horizontal right or left
• Energy-saving Hot Surface Ignition system with Norton® Mini-Igniter and patented adaptive learning algorithm
• Energy-saving PSC, multi-speed, direct-drive blower motor
• Quiet, corrosion-resistant, induced-draft blower assembly
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Convenient left or right connection for gas and electric service
• All models comply with California NOx Standards

Cabinet Features

• Heavy-gauge, reinforced, fully insulated steel cabinet with durable, Architectural Gray baked-enamel finish
• Top venting is standard; alternate flue/vent located on right side
• Foil-faced insulation lines the heat exchanger compartment
• Bottom or side air inlet; removable, solid bottom

The Goodman® GMS9/GCS9 Single-Stage, Multi-Speed Gas Furnaces feature a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a corrosion-resistant, painted steel cabinet, these units can be installed in a variety of locations.

• Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil for maximum efficiency
• Multi-position installation—GMS9: upflow, horizontal right or left; GCS9: downflow, horizontal right or left
• Energy-saving, reliable Hot Surface Ignition system, featuring a Norton® Mini-Igniter with patented adaptive learning algorithm to maximize igniter life
• Energy-saving PSC, multi-speed, direct-drive blower motor
• Quiet, corrosion-resistant, induced-draft blower
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• Combination redundant gas valve and regulator
• Top venting is standard; alternate flue/vent located on right side (GMS9)
• All models comply with California NOx Standards
• Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications
• Foil-face insulation lines the heat exchanger compartment
• Convenient left or right connection for gas and electric service
• Bottom or side air inlet (GMS9)
• Removable, solid bottom (GMS9)

The Goodman® GMV8 Two-Stage, Variable-Speed Gas Furnace features a patented aluminized-steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. This furnace is run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these units can be installed in a variety of locations.

• Corrosion-resistant, aluminized-steel tubular heat exchanger
• Multi-position installation—upflow, horizontal right or left
• Energy-saving, reliable Hot Surface Ignition system, featuring a Norton® Mini-Igniter with patented adaptive learning algorithm to maximize igniter life
• Auto-Comfort mode helps to efficiently create and maintain a comfortable climate by intuitively adjusting to the room’s environment
• 2-stage gas valve and super-efficient, quiet variable-speed blower motor
• Quiet, 2-speed, induced-draft blower
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• A rotating combustion air blower that provides the option of venting the furnace through the top, right-hand side or left-hand side
• All models comply with California NOx Standards
• Foil-face insulation lines the heat exchanger compartment
• Coil and furnace fit flush for easy installation
• Convenient left or right connection for gas and electric service
• Bottom or side air inlet
• Removable, solid bottom

The Goodman® GMS8/GDS8 Single-Stage, Multi-Speed Gas Furnaces feature a patented aluminized steel tubular heat exchanger and energy-efficient Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating/cooling applications. With a heavy-gauge, reinforced, wrap-around insulated steel cabinet and durable baked enamel finish, these units can be installed in a variety of locations.

• Corrosion-resistant, aluminized-steel tubular heat exchanger
• Multi-position installation—GMS8: upflow, horizontal right or left; GDS8: dedicated downflow
• Energy-saving, reliable Hot Surface Ignition system, featuring a Norton® Mini-Igniter with patented adaptive learning algorithm to maximize igniter life
• Energy-saving PSC, multi-speed, direct-drive blower motor
• Quiet, corrosion-resistant, induced-draft blower
• Integrated furnace control with diagnostics
• Low-voltage terminal blocks
• Combination redundant gas valve and regulator
• A rotating combustion air blower (GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
• Specific models comply with California NOx Standards
• Foil-face insulation lines the heat exchanger compartment
• Coil and furnace fit flush for easy installation
• Convenient left or right connection for gas and electric service
• Bottom or side air inlet (GMS8)
• Removable, solid bottom (GMS8